A Maximum 4,000-Hour Lamp Replacement Cycle and 4,000-Hour**Air Filter Replacement Cycle

The PT-VX510EA have a maximum lamp replacement cycle of 4,000 hours. The air filters of the PT-VX510EA also have a replacement cycle of 4,000 hours.** This reduces maintenance hassles for long periods of use, and helps to lower maintenance costs and reduce environmental impact.

* This is the maximum value when the lamp power is set to Eco, with the lamp turned on for 2 hours and off for 0.25 hour. Increases in the lamp on cycle or extended use with the lamp continuously turned on will shorten the lamp replacement cycle. When the lamp power is set to Normal, the lamp replacement cycle is 2,500 hours. The usage environment affects the lamp replacement cycle.
** The lamp power: Eco. The usage environment affects the duration of the filter.

Environmentally Friendly Standby Power Consumption of only 0.3 W*

When Standby mode is set to Eco, the standby power consumption is low at 0.3 W.*
This lowers running costs, and helps to reduce environment impact.

* Standby mode: Eco. When Standby mode is set to Eco, network functions such as standby on via LAN are not available. 
  Also, only certain commands can be received for external control using the serial terminal.

A Wide Variety of Functions for Easy Setup

Auto Input Signal Search

The Auto Input Signal Search function automatically detects the input signal and selects the input channel based on the signal. This function lets you start a presentation without any complicated setup required.

Input Guidance Function

If the input signal cannot be detected, the Input Guidance function will display connection instructions on the Projector screen, for easy setup.

Real-Time Keystone Correction

With Real-Time Keystone Correction, the Projector automatically senses if you adjust its angle (in the vertical direction) during operation and instantly makes whatever keystone correction is necessary for optimal viewing.

Colour-Board and Blackboard Modes

Colour-Board and Blackboard modes adjust the colours to provide high quality projection possible in rooms that don’t have a screen.

HDMI Input Terminal and Abundant Interfaces

Extensive interfaces include an HDMI input terminal, 2 sets of computer (RGB) input terminals, a wired LAN terminal, and a serial (RS-232C) terminal for external control. These features support a wide range of system architectures for portable or ceiling mounted use.

Easy Remote Monitoring and Control Over a LAN

Web browser on a Computer connected through a wired LAN system lets you remotely operate Projectors and check their status. An e-mail messaging function can also notify you when a lamp needs replacement, and indicate the overall Projector status. 

In addition, Multi Projector Monitoring and Control Software is available for monitoring and controlling multiple Panasonic Projectors from a single PC.

The wired LAN terminal is compatible with PJLink™ (class1), an open protocol that is used by many manufacturers, to enable integrated control of systems that contain different brands of Projectors.

Easy Lamp and Air Filter Replacement Simplifies Maintenance

For easier maintenance, you can replace the lamp from the top and the air filter from the side and the back, even after the Projector is installed on the ceiling. This eliminates the need to detach the Projector from its mounting bracket in ceiling mounted applications.