Faulty Power Supply Product Safety Recall Notice relevant to CP-JNF01FW PANASONIC SMART FEEDER or CP-JNW01FW PANASONIC DRINKING FOUNTAIN please click here for more information
PT-TW331REA
| Power Supply | 100−240 V AC, 50 / 60 Hz | |
|---|---|---|
| Power Consumption | 301 W (0.5 W when STANDBY MODE set to ECO,*1 6.0 W when STANDBY MODE set to NORMAL.*2) | |
| DLP™ Chip | Panel Size | 16.5 mm (0.65 in) (16:10 aspect ratio) |
| Display Method | DLP™ chip x 1 DLP™ system | |
| Pixels | 1,024,000 (1,280 x 800) pixels | |
| Lens | Fixed (0.521:1 throw ratio), manual focus, F 2.8, f 7.51 mm | |
| Lamp | 240 W UHM lamp | |
| Lamp Replacement Cycle (Normal / Eco1,Eco2 / AUTO) |
3,000 / 4,000 (Eco1, Eco2) / 7,500 hours*³ | |
| Screen Size (diagonal) | 1.14-5.72 m (45-225 in), 16:10 aspect ratio | |
| Brightness*⁴ | 3,100 lm | |
| Center-to-corner Uniformity*⁴ | 0.8 | |
| Contrast*⁴ | 7,500:1 (full on/off) (During RGB signal input, Colour mode: Dynamic, Lamp power: AUTO) | |
| Resolution | 1,280 x 800 pixels (Input signals that exceed this resolution will be converted to 1,280 x 800 pixels.) | |
| Optical Axis Shift | 10:-1.2 | |
| Scanning Frequency | HDMI | fH: 15-91.1 kHz, fV: 24-85.1 Hz, dot clock: 25 MHz-162 MHz |
| RGB (analogue) | fH: 15-91.1 kHz, fV: 24-85.1 Hz, dot clock: 162 MHz or lower | |
| YPBPR (YCBCR) | fH: 15.75 kHz, fV: 60 Hz [480i(525i)], fH: 15.63 kHz, fV: 50 Hz [576i(625i)], fH: 31.50 kHz, fV: 60 Hz [480p(525p)], fH: 31.25 kHz, fV: 50 Hz [576p(625p)], fH: 45.00 kHz, fV: 60 Hz [720(750)/60p], fH: 37.50 kHz, fV: 50 Hz [720(750)/50p], fH: 33.75 kHz, fV: 60 Hz [1080(1125)/60i], fH: 28.13 kHz, fV: 50 Hz [1080(1125)/50i], fH: 27.00 kHz, fV: 24 Hz [1080(1125)/24p], fH: 67.50 kHz, fV: 60 Hz [1080(1125)/60p], fH: 56.25 kHz, fV: 50 Hz [1080(1125)/50p] | |
| Video / S-Video | fH: 15.75 kHz, fV: 60 Hz [NTSC / NTSC4.43 / PAL-M / PAL60] fH: 15.63 kHz, fV: 50 Hz [PAL / PAL-N / SECAM] | |
| Keystone Correction Range | Vertical: ±40° (manual) | |
| Installation | Ceiling / floor, front / rear | |
| Terminals | HDMI IN | HDMI 19-pin x 1 (Deep colour, compatible with HDCP) Audio signal Linear PCM (Sampling frequency: 48 kHz / 44.1 kHz / 32 kHz |
| COMPUTER 1 IN | D-sub HD 15-pin (female) x 1 [RGB / YPB(CB)/PR(CR) x 1] | |
| COMPUTER 2 IN | D-sub HD 15-pin (female) x 1 [RGB / YPB(CB)/PR(CR) x 1] | |
| MONITOR OUT | D-sub HD 15-pin (female) x 1 (The signal selected from computer input 1/2 is output.) | |
| VIDEO IN | Pin jack x 1 | |
| SERIAL IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) | |
| AUDIO 1 IN | M3 x 1 (L-R x 1) | |
| AUDIO 2 IN | M3 x 1 (L-R x 1) | |
| AUDIO OUT | M3 x 1 (L-R x 1) | |
| LAN | RJ-45 x 1 (for network connection, 100BASE-TX / 10BASE-T, compliant with PJLink™ (class 1)) | |
| Mini USB | 1 (for interactive function) | |
| Built-in Speaker | 7 x 4 cm oval shape x 1, output power 8 W (Monaural) | |
| Cabinet Materials | Molded plastic (PC) | |
| Dimensions (W × H × D) | 288 x 106*⁵ x 270.5 mm (11-11/32 x 4-3/16*⁵ x 10-21/32 in) | |
| Weight | Approximately 2.5 kg (5.5 lbs)*⁷ | |
| Noise Level | 37 dB (Lamp power: Normal), 32 dB (Lamp power: Eco1), 29 dB (Lamp power: Eco2) | |
| Operating Environment | Operating temperature: 5-40°C (41-104°F) [Less than 750 m (2,500 ft) above sea level]; 5-35°C (41-95°F) [750-1,500 m (2,500-5,000 ft) above sea level] 5-30°C (41-86°F) [1,500-3,000 m (5,000-10,000 ft) above sea level] Operating humidity: 20-80 % (no condensation) | |
| Supplied Accessories | Power cord (3 m) x 1*⁸, Power cord cover x 1, Wireless remote control unit x 1, Lithium coin cell battery x 1, Computer cable (1.8 m) x 1, Interactive pen x 2, Batteries (AAA type x 4), USB cable (5.0 m) x 1, Application software (Light Pen 3) CD-ROM x 1 | |
| NOTE | *1 When [LAN (Standby)] / [VGA Out (Standby)] / [In Standby Mode (Audio)] are all set to [Off]. *2 When [LAN (Standby)] / [VGA Out (Standby)] / [In Standby Mode (Audio)] are all set to [On]. *3 This is the maximum value when the lamp is turned on for 2 hours and off for 0.25 hours. If the lamp is turned on more times or kept on for a long time, the lamp replacement cycle will shorten. The usage environment affects the duration of the lamp. *4 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *5 With legs at shortest position. *6 With lens at shortest position. *7 The above values are averages. Actual values may be different according to the product. *8 Power code (x2) for the PT-TW331REA / TW330EA / TW240EA. | |
Copyright © 2024 Panasonic New Zealand
Faulty Power Supply Product Safety Recall Notice relevant to CP-JNF01FW PANASONIC SMART FEEDER or CP-JNW01FW PANASONIC DRINKING FOUNTAIN please click here for more information