This website <https://www.panasonic.com/nz/> ("Site Page") is developed and owned by Panasonic Corporation and its affiliates (“Panasonic”, “us”). By accessing the Site Page, you agree to be bound by these Terms and Conditions of Use, the Privacy Statement, and any other terms and legal notices on the Site Page.

$ #,###.00 000 false categorybrowsepage,comparepage,wishlistpage,learncontentpage false productpage false 010 //panasonic-newzealand.ibrandiq.com/en/Widgets/FluidPanNZ/{0} //panasonic-newzealand.ibrandiq.com/Products/MultipleInStock/FluidPanNZ/{0}
Photo of Wireless Video Intercom VL-SWD272

Wireless Video Intercom VL-SWD272

Model composition Main Monitor (VL-MWD272) x1, Door Station (VL-V522L) x1, Wireless monitor (VL-WD613) x 1
Optional Accessories Wireless Monitor VL-WD613 (1 included with VL-SWD272)
Door Station VL-V522L (1 included with VL-SWD272)
Monitor VL-MD613 (1 included with VL-SWD272)
Repeater VL-FKD2
Maximum Connectable Units Wireless Monitor UP to 6 (1 included with VL-SWD501)
Wireless Monitor *A total of up to 6 wireless sub monitors and extension monitors can be registered.
Door Station UP to 2 (1 included with VL-SWD272)
Monitor UP to 3 (not including main monitor)
Monitor *A total of up to 6 wireless sub monitors and extension monitors can be registered.
Connectable Devices Electric Lock Release Support UP to 2 (user supplied)
Repeater UP to 2 (sold separately)
PBX Only Panasonic PBX
Convenience Picture Recording Internal memory: Up to 50 visitors/sessions (up to 8 still images per visitor/session)
Night Vision Yes (Warm white LED lights, Infrared LEDs)
Touch Panel / Pan & Tilt - / Yes
Voice Changer Yes (only from the main monitor)
Intercom call Intercom Call (between main monitor, sub monitor and extension monitor)
Monitor Power source 100 - 240 V AC, 50/60 Hz
Power consumption Standby : approx. 2.5W
Power consumption During operation : approx. 10W
Dimensions (H x W x D) Approx. 158 x 243 x 29.5 (mm)
Mass (weight) Approx.825g (including mounting bracket & AC cable)
Mass (weight) * The weight of the AC cable differs depending on the region.
Operating environment Ambient temperature : 0℃ to + 40 ℃, Up to 90 % RH (Relative Humidity) non condensing
Display size 7-inch, wide color / WVGA (800 x 480 pixcels)
Display language English, Arabic
Talking method Hands-free
Installation method Wall mount (mounting bracket supplied)
Frequency range 1.88 GHz to 1.90 GHz
External material ABS
Door Station Power source Supplied by the Main Monitor Station
Dimensions (H x W x D) Approx. 131 x 99 x 36.5 (mm) *Excluding protruding sections
Mass (weight) Approx. 200 g
Operating environment Ambient temperature: Approx. -15 °C to +55 °C, Up to 90 % RH (Relative Humidity) non condensing
Operating environment (tested up to -20 °C)
Viewing angle Horizontally: Approx. 87 degree, Vertically: Approx. 66 degree
Installation method Surface mount (mounting base supplied)
Image sensor/ Camera (pixel) CMOS sensor (Approx. 0.3M pixels)
Minimum illuminance required 1 lx (within approx. 50 cm from the camera lens)
Lighting method Warm white LED lights, Infrared LEDs
IP rating (INGRESS PROTECTION) IPX3 *Water resistance is only assured if the doorphone is installed correctly according to the instructions in the Installation Guide, and appropriate water protection measures are taken.
External material Flame retardant PC+ABS resin, Flame retardant ABS resin
Wireless Monitor Power source Rechargeable Ni-MH (AAA x 2)
Dimensions (H x W x D) Approx. 173 x 52 x 30 (mm) *Excluding protruding sections
Mass (weight) Approx. 160 g (including the batteries)
Operating environment Ambient temperature: 0 °C to +40 °C, Up to 90 % RH (Relative Humidity) non condensing
Display 2.2-inch colour / QVGA (320 x 240 pixels)
Frequency 1.88 GHz to 1.90 GHz
External material ABS resin
Operating time Standby use: approx. 80 hours *When used fully charged in an operating temperature of 20 °C.
Charging time Approx. 8 hours *When the operating temperature is 20 °C. The charging time may increase when the operating temperature is lower than this.
Transmitting range Approx. 100 m (line-of-sight distance from the main monitor)
Charger Power source AC adaptor (PNLV226)
Power source Input: 220-240 V AC, 0.1 A, 50/60 Hz, Output: 5.5 V DC, 0.5 A
Power consumption Standby: Approx. 0.4 W (when the sub monitor is not placed in the charger)
Power consumption During charging: Approx. 1.4 W
Dimensions (H x W x D) Approx. 43 x 81 x 76 (mm) *Excluding protruding sections
Mass (weight) Approx. 70 g (excluding the AC adaptor)
Operating environment 0 °C to +40 °C, Up to 90 % RH (Relative Humidity) non condensing
External material ABS resin

This website <https://www.panasonic.com/nz/> ("Site Page") is developed and owned by Panasonic Corporation and its affiliates (“Panasonic”, “us”). By accessing the Site Page, you agree to be bound by these Terms and Conditions of Use, the Privacy Statement, and any other terms and legal notices on the Site Page.