E3 High Static Splittable Ducted
High Static and Large Airflow Splittable Ducted
E3 Type High Static Splittable Ducted units are compact, high-performance, and ideal for limited spaces. They offer superior air quality with the nanoe X Generator Mark3, which is effective even in large areas.
Please Select Your User Type
E3 High Static Splittable Ducted
Specs
S-180ME3H
S-224ME3H
S-280ME3H
nanoe™ X- ECONAVI
- R410A
- DC motor
Easy installation and maintenance with compact and splittable chassis design.
High air flow rate of 1,400 L/s (22.4 and 28.0 kW model).
Space saving 916 mm depth.
Light weight of 84 kg (18.0 kW model).
nanoe™ X: 100 times more nanoe™ particle for wide commercial space.
Documents
Combination
Case Studies
Features
A New Level of Air Quality with nanoe™ X Generator Mark3
24-hour nanoe™ X Air Protection
nanoe™ X inhibits certain bacteria, viruses, pollens, allergens, mould, and hazardous substances contained in PM2.5. Providing effective deodorisation and improving the quality of your air. nanoe™ X functions in both cooling and fan modes, and is maintenance-free, helping you enjoy 24 hours of quality air while keeping your costs down.
Higher Concentration, Even in Large Space
The amount of hydroxyl radicals generated increased 100 times, compared to the original nanoe™, which achieves greater effectiveness even in large spaces of 112 m².
Conditions of the simulation ･Room size: 112 m² ･Room height: 2.4 m ･Inspection model: 4-Way Cassette ･Position of IDU: Centre
Note: The result is based on the conditions for the simulation and it may differ from the concentration measured in an actual room. nanoe™ particles are extremely tiny in nano-meter size. They cannot be seen, so the concentration image is solely for illustrative purposes.
Effective at Eliminating Odours in Only 30 Minutes
The nanoe X Generator Mark3 reduces odours by as much as 1.8 levels* in just 30 minutes. This is half the time required to achieve the same effect compared to the conventional nanoe X Generator Mark 2.
*A 1.8 level decrease in odour intensity is equivalent to a reduction of 95% or more.
[Odour intensity] 5: Very strong odour, 4: Strong odour, 3: Easily detectable odour, 2: Weak, recognisable odour (cognitive threshold concentration), 1: Barely detectable odour (detection threshold concentration), 0: No odour
Note: The test result is obtained using a 4-Way Cassette. **Testing Overview: [Testing organisation] Panasonic Product Analysis Center [Test method] Verification in a test room (approx. 230 m³ (6.8 x 8.5 x 4.0 m)) using a 6-step odour intensity display method [Method of deodorisation] Operation of a CS-P80U6 equipped with a nanoe X Generator Mark2 and release of nanoe™ [Target] Adhered aging odour (nonenal) [Test Result] Odour intensity reduced by 1.8 in 60 minutes (L19YK032-01) ***Testing Overview: [Testing organisation] Panasonic Product Analysis Center [Test method] Verification in a test room (approx. 230 m³ (6.8 x 8.5 x 4.0 m)) using a 6-step odour intensity display method [Method of deodorisation] Operation of a CS-P160U6 equivalent tester equipped with a nanoe X Generator Mark3 and release of nanoe™ [Target] Adhered aging odour (nonenal) [Test Result] Odour intensity reduced by 1.8 in 30 minutes (R21HM003-0)
[Odour intensity] 5: Very strong odour, 4: Strong odour, 3: Easily detectable odour, 2: Weak, recognisable odour (cognitive threshold concentration), 1: Barely detectable odour (detection threshold concentration), 0: No odour
Note: The test result is obtained using a 4-Way Cassette. **Testing Overview: [Testing organisation] Panasonic Product Analysis Center [Test method] Verification in a test room (approx. 230 m³ (6.8 x 8.5 x 4.0 m)) using a 6-step odour intensity display method [Method of deodorisation] Operation of a CS-P80U6 equipped with a nanoe X Generator Mark2 and release of nanoe™ [Target] Adhered aging odour (nonenal) [Test Result] Odour intensity reduced by 1.8 in 60 minutes (L19YK032-01) ***Testing Overview: [Testing organisation] Panasonic Product Analysis Center [Test method] Verification in a test room (approx. 230 m³ (6.8 x 8.5 x 4.0 m)) using a 6-step odour intensity display method [Method of deodorisation] Operation of a CS-P160U6 equivalent tester equipped with a nanoe X Generator Mark3 and release of nanoe™ [Target] Adhered aging odour (nonenal) [Test Result] Odour intensity reduced by 1.8 in 30 minutes (R21HM003-0)
Lightweight and Compact for Easy Delivery
The unit has a compact design with a depth of 916 mm and a weight of 84 kg*. This makes delivery, installation, and maintenance easier.
* 18.0 kW model
Splittable Design Makes It Easy to Remove and Maintain
It can be disassembled in two steps, even in limited space, making maintenance easier when working on the ground.
1) Remove the screws and bolts to separate the casing from the main body.
2) Remove the screws and bolts to separate the fan from the heat exchanger.
2) Remove the screws and bolts to separate the fan from the heat exchanger.
Max. 200 Pa Static Pressure Setting for Large Facilities
A maximum static pressure setting of a high 200 Pa enables the use of long ducts for installation in a wide range of spaces. Ideal for large-scale offices, restaurants, and other facilities.
ECONAVI Sensor
Providing outstanding energy-saving performance, Panasonic’s inverter VRF System can be connected to ECONAVI to detect when energy is being wasted. ECONAVI senses the presence or absence of people and the level of activity in each area of an office. When unnecessary heating or cooling is detected, indoor units are individually controlled to match office conditions for energy-saving operation.
1. Detection of the level of activity enables optimum power saving.
2. Sensor is remotely located to maximise the energy-saving effect.
2. Sensor is remotely located to maximise the energy-saving effect.
Leading Control Options
Panasonic air conditioning systems allow flexible control options. Individual, centralised, Cloud control and WLAN control are all possible. Please consult with a Panasonic air conditioning specialist for advice as to which control solution best suits your system requirements.
Flexible Installation
You can select between the three Static Pressure modes for extra installation flexibility.
*22.4/28.0 kW model
Three inspection ports are required at the underside of the indoor unit body (field supply).
