Intelligently Balances Energy Savings And Comfort
Air conditioners have become an essential appliance in every home. In warmer regions especially, they can be one of the appliances that consume high amounts of energy in a household. This means that energy efficiency is becoming a concern but energy savings should never come at the cost of indoor air quality or the occupants’ comfort.
Incorporating Artificial Intelligence (A.I.) into air conditioners can bring about improvements in both energy efficiency and comfort levels. With A.I., it is possible to optimize variables such as input power and temperature control – to provide a good balance between cooling comfort and energy savings.
About
Conventional Energy
Savings Mode
About ECO
mode with A.I.
Control
ECO mode with A.I. Control Vs Normal mode
Benefits of ECO
mode with A.I.
Control
How to activate
ECO mode with
A.I. Control
Product with
ECO mode with
A.I. Control
About Conventional Energy Savings Mode
The energy savings feature has always been a common deciding factor for homeowners when purchasing an air conditioner. An energy saving air conditioner is always a good investment for the long run. It optimizes the usage of energy so less power is consumed while still providing the same cooling comfort indoors.
A normal cooling mode merely operates at optimal capacity to cool a room until it reaches the set temperature.
In contrast, the energy savings mode reduces the air conditioner’s energy usage by using less power - either by automatically adjusting the compressor to run at minimal speed or operate the air conditioner at a few degrees above set temperature.
While this mode provides significant energy savings, user comfort is often compromised. Air conditioners on energy saving mode lower room temperature gradually to prevent spikes in energy usage, therefore takes longer to cool a room down. Low comfort levels can impact a person’s well being and quality of life. Therefore, it is imperative to maintain a comfortable indoor environment while saving energy.
Panasonic ECO mode with A.I. Control - For Optimized Energy Savings And Home Comfort
In order to balance energy savings with user comfort, Panasonic incorporates artificial intelligence (A.I.) into its air conditioning systems. Panasonic ECO mode with A.I. optimizes both variables; input power consumption and temperature shift control, to determine the optimal combination for increased overall energy efficiency and comfort. While comfort levels differ from person to person, this feature determines its user’s optimum comfort level based on current indoor condition and the unit’s operation time, to reach the set temperature.
Feeling Comfortable
ECO mode with A.I. works around the ever changing temperature in the room. So whatever the indoor condition may be, you will remain comfortable while conserving energy.
Feeling Less Comfortable
Conventional ECO mode operates at preset settings to save energy without reacting to changes in the condition of the room. This often result in discomfort for the occupants.
A.I. Continuously Gathers Information on Changing Indoor Environment
Each room condition is different from one another and vary through the course of a day. Room size and heat source such as sun light, home appliances as well as body heat with occupants in the room greatly affect condition of a room. The ECO mode with A.I. feature progressively learns the room condition each time this mode is activated based on intake air temperature and operation time until the set temperature is reached. For example, in the morning it can interpret a room is in cool condition when the intake temperature is low and short time is taken to reach the set temperature. By using A.I. to regulate the information of indoor condition, the occupant comfort can be address more efficiently.
During Warm Day
When Air Conditioner and ECO mode is switched on – Maximize Cooling Comfort
A big warm room with sunlight and multiple appliances require a longer time to reach set temperature and cooling comfort. In this case, ECO mode with A.I. prompts the air conditioner to provide comfort quickly, in the most energy efficient manner.
After Reach Set Temperature – Consistent Comfort and Saves Energy
Upon reaching set temperature, this feature continuously gathers information from the fluctuations in the room's environment while the air conditioner is running. It automatically regulates the room’s temperature to maintain a comfortable indoor temperature more efficiently.
During Cool Night
When Air Conditioner and ECO mode is switched on – Maximize Energy Saving
When the room is cooler at night and with lesser human activity, a shorter time and less input power is needed to reach the set temperature. ECO mode with A.I. constantly adjusts power consumption to minimize energy usage while maintaining a comfortable indoor environment, all through the night.
After Reach Set Temperature – Consistent Comfort and Saves Energy
Upon reaching set temperature, this feature continuously gathers information from the fluctuations in the room's environment while the air conditioner is running. It automatically regulates the room’s temperature to maintain a comfortable indoor temperature more efficiently.
Comparison of ECO mode with A.I. Control & Normal mode
Panasonic ECO mode with A.I. saves up to 20%* energy compared to normal mode.
*Comparison of ECO mode & Normal mode using 1.5HP inverter model
ECO Mode:
ECO Mode, Outside temperature : 35°C/24°C
Remote setting temperature : 25°C, with Fan Speed: High.
Horizontal Airflow direction : Middle
Vertical Airflow direction : Straight
Normal Mode:
Normal Mode, Outside temperature : 35°C/24°C
Remote setting temperature : 25°C, with Fan Speed: High.
Horizontal Airflow direction : Middle
Vertical Airflow direction : Straight
Total power consumption amount is measured for 1 hour under stable operation. At Panasonic Amenity Room (size : 13.3m²). The effect differs according to conditions of installation and usage.
Benefits of Panasonic ECO mode with A.I. Control
Incorporating the ECO mode with A.I. feature into air conditioners allow for optimal energy efficiency without affecting user comfort. It progressively analyses the room’s condition and reacts accordingly so that the air conditioning unit operates at a perfect balance between providing both comfort and energy savings.
Minimizing your energy consumption
ECO mode with A.I. control prioritizes user comfort as it delivers maximum cooling, efficiently. This mode is beneficial for individuals working full time from home, as extra cooling is required in the afternoons while less is required during other parts of the day. This helps their working day to be more effective - by providing a comfortable indoor environment while keeping energy bills low.
Autonomous adjustments for energy savings
Temperatures are typically lower when the sun is down, so the home feels much cooler. Therefore, gradual cooling can be afforded. ECO mode with A.I. is ideal for use at night, when energy consuming full blasts of cool air is unnecessary. This reduces the power consumption to maximize energy savings.
Reacts to indoor environment for your comfort
The environment at home varies throughout the day, depending on indoor activities. ECO mode with A.I. is useful in living spaces where constant changes in the amount of activities occur. When a rise in temperature is detected due to higher levels of human activity, this feature quickly lowers the room temperature to a comfortable level without consuming large amounts of energy.
Simple Steps to Activate ECO Mode with A.I. Control
Conveniently activate ECO Mode with A.I. control using the remote controller or via Panasonic Comfort Cloud App.
Activating ECO Mode with A.I. Control with Remote Controller
A. Press the “POWERFUL/ECO” button twice to switch on ECO Mode with A.I. control.
B. For remote controllers with slider, first, slide the slider down. Then, press the “ECO” button once to switch on ECO Mode with A.I. control.
Activating ECO Mode with A.I. Control via Panasonic Comfort Cloud App
1. In the Panasonic Comfort Cloud App, tap the “...” icon on the main screen to access additional features.
2. Toggle ECO “ON”, tap “OK” to switch on ECO mode.
3. The ECO icon will be displayed on the main screen.
*To activate ECO Mode with A.I. Control mode with mobile devices, the air conditioner needs to be connected to the Panasonic Comfort Cloud App and an internet connection is required.
*User interface is based on Panasonic Comfort Cloud App version 1.15.0 and may vary depending on the model’s functionality.
Achieving Energy Efficient yet Comfortable Homes
Artificial intelligence technologies make it possible to achieve comfort and optimal energy consumption, autonomously.
With Panasonic ECO mode with A.I. control, save energy while keeping your home a comfortable cool haven for you to retreat and unwind.
Disclaimer
*Applicable to Premium Inverter XU Series (XKQ), Deluxe Inverter XPU Series, Standard Inverter QU Series (YKQ) and Standard Inverter PU Series only.
Products with ECO mode with A.I.
Premium Inverter XU Series (XKQ)
nanoe™ X, nanoe-G, Built-in Wi-Fi Control, iAUTO-X, AEROWINGS, ECO Mode with A.I. Control, Inverter, R32 Refrigerant.
Deluxe Inverter XPU Series
nanoe™ X, nanoe-G, AEROWINGS, POWERFUL Mode, ECO Mode with A.I. Control, Inverter, R32 Refrigerant.
Standard Inverter QU Series (YKQ)
BIG FLAP/AEROWINGS, POWERFUL Mode, ECO Mode with A.I. Control, Inverter, R32 Refrigerant.
Standard Inverter PU Series
BIG FLAP/AEROWINGS, POWERFUL Mode, ECO Mode with A.I. Control, Inverter, R32 Refrigerant.
