CZ-CAPBC2
Seri-Para I/O Unit for Each Indoor Unit
Each individual indoor unit, or any external electrical device up to 250V AC, 10 A, can be controlled and monitored for status via contact signal.
![](/content/dam/pim/vn/en/CZ/CZ-CAP/CZ-CAPBC2-SPP/ast-2076550.jpg.pub.crop.pc.thumb.640.1200.jpg)
Please Select Your User Type
![](/etc/designs/panasonic/productpage-2-clientlibs/scene7/images/icn-spinicon.png)
![](/etc/designs/panasonic/productpage-2-clientlibs/scene7/images/icn-pinchzoom.png)
CZ-CAPBC2
Specifications
Control and status-monitoring of individual indoor units (1 group).
In addition to ON/OFF, air speed and operation mode can be controlled digitally.
Central monitoring detects temperature settings and intake temperatures.
Analog input for temperature setting is 0 to 10 V, or 0 to 140 Ohm.
Power is supplied from the T10 terminal of the indoor units.
Can be used with a separate power supply (in the case of detection of intake temperatures).
Documents
Case Studies
Features
Seri-Para I/O Unit for Each Indoor Unit
Control and status-monitoring for each individual indoor unit (1 group). Digitally control ON/OFF and changes to airflow speed and operation modes. The central controller can adjust temperature settings and measure indoor inlet temperatures. Analog input for temperature setting is 0 to 10 V, or 0 to 140 Ohm.
• Power supplied from the T10 terminal of the indoor units
1) Central control panel 2) Remote station
1) Central control panel 2) Remote station
![Seri-Para I/O Unit for Each Indoor Unit](/content/dam/pim/vn/en/CZ/CZ-CAP/CZ-CAPBC2-SPP/ast-1913964.jpg.pub.thumb.644.644.jpg)