The evolution of nanoe with more hydroxyl radicals for greater benefits

nanoe™ X technology has evolved dramatically. Compared to the first nanoe™ generator developed by Panasonic in 2003, the nanoe X Generator Mark 2, developed in 2019, generates 20 times and the nanoe X Generator Mark 3, developed in 2021, even generates 100 times as many hydroxyl radicals.

Inhibits Virus

An air conditioner equipped with nanoe™ X Generator Mark 3 inhibits activity of adhered virus (Bacteriophage) by 98.81％ in 4 hours.

Testing organisation: SGS Inc / Test subject: Adhered Bacteriophage / Test volume: Approx. 139m  large space (6.6×8.9x2.48m)
Test result: Inhibited 98.81％ in 4 hours
Test repot no.: SHES210901902583

Deodorise^*1*2

An air conditioner equipped with nanoe™ X Generator Mark 3 reduces cigarette smoke odour intensity by 1.7 levels in 30 mins.

Testing organisation: SGS Inc / Test subject: Adhered cigarette smoke odour / Test volume: Approx. 139m  large space (6.6×8.9x2.48m)
Test result: Odour intensity reduced 1.7 levels in 30 mins.
Test repot no.: SHES210901902478

Odour intensity: 5-Very strong odour 4-Strong odour 3-Easily detectable odour
2-Weak,recognisable odour (cognitive threshold concentration) 1-Barely detectable odour (detection threshold concentration) 0-No odour

Inhibits Pollen

The result of nanoe™ X Generator Mark 3
Inhibits pollen in 1/4 the time of nanoe™ X Generator Mark 2^*7

Inhibits Mould

Inhibits mould growth in fans and heat exchangers^*6
Internal Cleaning Function
After cooling/drying function, the inside of the indoor unit is automatically dried.

nanoe™ X Operating time

Results of Mould Inhibition Test

Comparison with and without internal cleaning function.

Test Method: A mould sensor from the Laboratory for mold prediction was installed in an indoor unit (CS-P80U7H) and the growth of mould was compared after 9 days of cooling operation (3 hours of cooling operation and 21 hours of shutdown) with and without internal cleaning.
Environmental Conditions: Temperature 25°C, humidity 70%
Testing Organisation: Laboratory for mould prediction
Test Report Nos.: 210804, 210810, 210805, 210811

*1 This is not a proven effect in an actual operating space. The deodorizing effect depends on the size of the operating space, ambient environment (temperature and humidity), operation time, and types of odours absorbed in fibres.
*2 Effectiveness in a test space of approx. 230 m³. The figures are not the results of tests conducted in an actual operating space.
*3 [Testing organisation] Panasonic Product Analysis Center [Test method] Verification in a test room (approx. 230 m³) using a 6-step odour intensity display method [Method of deodorisation] Operation of a CS-P160U6 equivalent tester equipped with a nanoe™ X Generator Mark 3 and release of nanoe™ [Target] Adhered sweat odour (hexanoic acid) [Test result] Odour intensity was reduced to 1.0 in 2 hours (R21HM004-0) [Method of deodorisation] Operation of a CS-P80U6 4-way cassette equipped with a nanoe™ X Generator Mark 2 and release of nanoe™  [Target] Adhered sweat odour (hexanoic acid) [Test Result] Odour intensity was reduced to 3.1 in 2 hours (L19YK032-11)
*4 [Testing organisation] Panasonic Product Analysis Center [Test method] Verification in a test room (approx. 230 m³) using a 6-step odour intensity display method [Method of deodorisation] Operation of a CS-P160U6 equivalent tester equipped with a nanoe™ X Generator Mark 3 and release of nanoe™ [Target] Adhered urine odour (trimethylamine) [Test Result] Odour intensity reduced to 1.0 in 2 hours (R21HM005-0)
*5 [Testing organisation] Panasonic Product Analysis Center [Test method] Verification in a test room (approx. 230 m³) using a 6-step odour intensity display method [Method of deodorisation] Operation of a CS-P160U6 equivalent tester equipped with a nanoe™ X Generator Mark 3 and release of nanoe™  [Target] Adhered faeces odour (methyl mercaptan) [Test Result] Odour intensity reduced to 1.0 in 2 hours (R21HM006-0)
*6 While this function is effective in inhibiting mould growth, it does not prevent mould from occurring. The mould growth inhibition effect may vary depending on the installation environment and operating time. *When using the nanoe™ X Generator Mark 3 function, a multi-function wired remote control (CZ-10RT4C) is required. (The floor-standing type with a built-in control switch in the main unit can be used.) *Only ON/OFF operation is possible with the multilingual wired remote controller (CZ-10RTF4). Also, local setup is required to use the nanoe™ X Generator Mark 3.
*7 Effect after 3 hours in a test space of approx. 24 m³. The figures are not the results of testing in an actual operating space.
*8 <nanoe™ X Generator Mark 1> [Testing organisation] Panasonic Product Analysis Center [Test method] ELISA method of measuring allergens adhering to fabric in a test room (approx. 24 m³) [Method of inhibition] Release of nanoe™ [Target] Adhered allergen (cedar pollen) [Test Result] Inhibition of 99% or more in 24 hours (4AA33-151001-F01) <nanoe™ X Generator Mark 2>
[Testing organisation] Panasonic Product Analysis Center, [Test method] ELISA method of measuring allergens adhering to fabric in a test room (approx. 24 m³) [Method of inhibition] Release of nanoe™ [Target] Adhered allergen (cedar pollen) [Test Result] Inhibition of 99% or more in 12 hours confirmed (L19YA009) <nanoe™ X Generator Mark 3>  [Testing organisation] Panasonic Product Analysis Center [Test method] ELISA method of measuring allergens adhering to fabric in a test room (approx. 24 m³) [Method of inhibition] Release of nanoe™ [Target] Adhered allergen (cedar pollen) [Test Result] Inhibition of 99% or more in 3 hours (H21YA017-1)