Flexible Expandability
Front / rear tally lamp — visible from 4 sides
Thanks to the clean lines of the body design, the tally lamps can be monitored from the front, top, side, or back, a welcome convenience on any shoot.
3 power source options
For your convenience in various situations, three power source options are offered. An AC adapter is included for studio shoots and outdoor sets where the camera is set up on an ongoing basis. The battery pack (sold separately*) facilitates handheld shooting, drone shooting, and other kinds of mobile shooting. And when multiple cameras are controlled remotely, power can be stably supplied via Ethernet cable and PoE+.
*Battery Pack: AG-VBR59/89/118. Battery Charger: AG-BRD50. Max. 11800mAh (AG-VBR118) can be used for approximately 12 hours.
Focus ring control (LINEAR/NONLINEAR)
If used in combination with the LUMIX S Series lens, you can control the focus ring according to your feel. Select between NONLINEAR, in which acceleration is applied according to the rotation speed, and LINEAR, which enables focusing with a fixed amount according to the rotation angle. Because the rotation angle can be set with LINEAR, intuitive and accurate focusing is possible in the same way as the equipment you are used to.
Wi-Fi® / Bluetooth® / LUMIX Sync App
Installing the Panasonic LUMIX Sync Android or iOS app on a smartphone or tablet, you can connect to the BS1H via Wi-Fi® or Bluetooth® v4.2 (Low Energy) to monitor images or remotely control the camera. It’s also possible to copy settings from one camera to another using the LUMIX Sync app*, making multiple-camera control simpler.
*Copying must done between cameras of the same model.
･The Wi-Fi CERTIFIED™ Logo is a certification mark of Wi-Fi Alliance®.
･The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Panasonic Corporation is under license. Other trademarks and trade names are those of their respective owners.
･IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
･Android and Google Play are trademarks or registered trademarks of Google Inc.
Higher functionality remote control compatibility
The remote terminal (2.5mm super mini jack) of the LUMIX BS1H offers compatibility with widely used high-functionality remote controls, which enables precise remote operation.
3.5mm dia. MIC jack and headphone jack
LUMIX BS1H features a 3.5mm diameter MIC Jack and 3.5mm diameter Headphone Jack. LINE input is also supported by the 3.5mm MIC Jack, making it possible to input sounds from an external audio device for more efficient video production.
XLR microphone adaptor DMW-XLR1 (sold separately)
This accessory allows you to connect an XLR microphone and achieve high-quality stereo sound. High-res sound recording at 96 kHz/24-bit is also selectable in MOV recording. This accessory also supports the use of plug-in power.
