Panasonic values your privacy and your trust is important to us. We use cookies to enhance your website experience. By clicking “Accept all cookies”, you agree Panasonic can store cookies on your device and disclose information in accordance with our Privacy Policy. OK Learn More
PT-TW231REA
| General | Power supply | 100 - 240 V AC, 50/60 Hz | |
|---|---|---|---|
| Power consumption | 310 W (0.42 W when STANDBY MODE set to ECO,*1 9.5 W when STANDBY MODE set to NETWORK.) | ||
| Optical system | Optical isolation/Prism synthesis by using a dichroic mirror | ||
| LCD panel | Panel size | 15 mm (0.59 inches) diagonal (16:10 aspect ratio) | |
| Display method | Transparent LCD panel (x 3, R/G/B) | ||
| Drive system | Active matrix | ||
| Pixels | 1,024,000 pixels (1,280 × 800) x 3, Total: 3,072,000 pixels | ||
| Pixel configuration | Stripe | ||
| Lens | Fixed (0.5:1 throw ratio), manual focus F = 1.8, f = 6.68 mm | ||
| Lamp | 230 W UHM lamp (The lamp replacement cycle is 4,000 hours*2) | ||
| Screen size (diagonal) | 1.52 - 2.79 m (60 - 110 inches) (16:10 aspect ratio) | ||
| Color reproducibility | Full color (16,777,216 colors) | ||
| Brightness*sup3/sup | 2,500 lm (lamp power: Normal) | ||
| Center-to-corner uniformity*sup3/sup | 80% | ||
| Contrast*sup3/sup | 500:1 (full on/full off, lamp power: Normal) | ||
| Resolution | 1,280 × 800 pixels (Input signals that exceed this resolution will be converted to 1,280 × 800 pixels.) | ||
| Scanning frequency | HDMI | (Horizontal) 25-80 kHz; (Vertical) 50-85 Hz; (Dot clock) 162 MHz or lower | |
| RGB (analog) | (Horizontal) 15-100 kHz; (Vertical) 50-100 Hz; (Dot clock) 140 MHz or lower (Signals exceeding the dot clock rate of 140 MHz are downsampled.) | ||
| YPsubB/subPsubR/sub (YCsubB/subCsubR/sub) | fH: 15.75 kHz, fV: 60 Hz [480i (525i)] fH: 31.50 kHz, fV: 60 Hz [480p (525p)] fH: 45.00 kHz, fV: 60 Hz [720 (750)/60p] fH: 33.75 kHz, fV: 60 Hz [1080 (1125)/60i] fH: 15.63 kHz, fV: 50 Hz [576i (625i)] fH: 31.25 kHz, fV: 50 Hz [576p (625p)] fH: 37.50 kHz, fV: 50 Hz [720 (750)/50p] fH: 28.13 kHz, fV: 50 Hz [1080 (1125)/50i] | ||
| Video/S-Video | fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60], fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM] | ||
| Optical axis shift | 10:-1.44 (fixed) | ||
| Keystone correction range | Vertical: ±20° | ||
| Installation | Ceiling/floor, front/rear (Menu setting) | ||
| Built-in speaker | 3.7 cm round shape x1, output power 10 W (monaural) | ||
| Terminals | HDMI IN | (HDMI 19-pin) x 1 (compatible with HDCP) Audio signal Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz) | |
| COMPUTER IN 1 | D-sub HD 15-pin (female) x 1 [RGB/YPB(CB)/PR(CR)x 1] | ||
| COMPUTER IN 2 / MONITOR OUT | D-sub HD 15-pin (female) x 1 (RGB x 1) (input/output selectable using on-screen Menu) (When Monitor Out is selected, the COMPUTER IN 1 signal is output.) | ||
| VIDEO IN | RCA pin × 1 | ||
| S-VIDEO IN | Mini DIN 4-pin × 1 | ||
| COMPUTER AUDIO IN | M3 x 1 (L-R x 1) | ||
| AUDIO IN | RCA pin x 2 (L-R x 1) for VIDEO/S-VIDEO input | ||
| AUDIO OUT | M3 x 1 (L-R x 1) | ||
| SERIAL IN | D-sub 9-pin (male) × 1 for external control (RS-232C compliant) | ||
| LAN | (RJ-45)× 1 (for network connection, 100BASE-TX/10BASE-T, compliant with PJLink™ (class 1)) | ||
| USB | 1 (for interactive function) | ||
| Power cord length | 2.0 m (6&7") | ||
| Cabinet materials | Molded plastic (PC) | ||
| Dimensions (W × H × D) | 350 × 143 × 389 mm (13-25/32" × 5-5/8" × 15-5/16") (with legs at shortest position) | ||
| Weight | Approx.4.7 kg (10.4 lbs)*4 | ||
| Noise level | 36 dB (Lamp power: Normal); 29 dB (Lamp power: Eco) | ||
| Operating temperature | 0°C- 35°C [32°F-95°F] (less than 1,200 m [3,937 ft] above sea level), 0°C- 30°C [32°F-86°F] (between 1,200 m and 2,700 m [3,937 ft to 8,858 ft] above sea level) | ||
| Operating humidity | Operating humidity: 20% - 80% (no condensation) | ||
| Supplied accessories | Power cord x 1*5, Power cord cover x 1, Wireless remote control unit x 1, Batteries (AAA/R03/LR03 type x 6), Computer cable (1.8 m, for VGA) x 1, Interactive pen x 1, Interactive pointer x 1, USB cable (4.5 m) x 1, Software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software) x1, Software CD-ROM (Light Pen II) x 1 | ||
| NOTE | *1 When Standby mode is set to Eco, network functions such as standby on via LAN are not available. Only certain commands can be received for external control using the serial terminal. *2 This is the maximum value when the lamp power is set to Eco mode where the lamp is turned on for 2 hours and off for 0.25 hours. If the lamp is turned on more times or kept on for a long time, the lamp replacement cycle will shorten. In Normal mode, the lamp replacement cycle is 3,000 hours. The usage environment affects the duration of the lamp. *3 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *4 The above values are averages. Actual values may be different according to the product. *5 Power cord x 2(PT-TW231REA/TW231REAJ) *6 Power cord x 2(PT-TW230EA/TW230EAJ) | ||
© 2023 - Panasonic Life Solutions India Pvt. Ltd. All rights reserved
MRP wherever mentioned is inclusive of all taxes
Panasonic values your privacy and your trust is important to us. We use cookies to enhance your website experience. By clicking “Accept all cookies”, you agree Panasonic can store cookies on your device and disclose information in accordance with our Privacy Policy. OK Learn More