Specs - PT-DX500E Installation- Panasonic

Panasonic values your privacy and your trust is important to us. We use cookies to enhance your website experience. By clicking “Accept all cookies”, you agree Panasonic can store cookies on your device and disclose information in accordance with our Privacy Policy. OK Learn More

AddedRemoved

See product page

Copy URL

PT-DX500E

General	DLP™ chip	Panel size	17.8 mm (0.70 inches) diagonal (4:3 aspect ratio)
		Display method	DLP™ chip x 1, DLP™ projection system
		Pixels	786,432 (1,024 x 768) pixels
	Lens		Manual zoom (2x zoom), manual focus F 2.0-3.4, f 21.5-43.0 mm
	Lamp		300 W (max. 310 W) UHM lamp
	Screen size (diagonal)		1.02-7.62 m (40- 300 inches), 4:3 aspect ratio
	Brightness*sup1/sup		4,500 lumens (lamp mode: NORMAL)
	Center-to-corner uniformity ratio*sup1/sup		90%
	Contrast ratio*sup1/sup		2,000:1 (full on/full off)
	Resolution		1,024 x 768 pixels (Input signals that exceed this resolution will be converted to 1,024 x 768 pixels.)
	Scanning frequency	HDMI/DVI-D	fH: 27 kHz-100 kHz, fV: 24 Hz-120 Hz, dot clock: 25 MHz-162 MHz
		RGB	fH: 15 kHz-100 kHz, fV: 24 Hz-120 Hz, dot clock: 162 MHz or lower
		YPsubB/subPsubR/sub (YCsubB/subCsubR/sub)	480i (525i): fH 15.75 kHz; fV 60 Hz 576i (625i): fH 15.63 kHz; fV 50 Hz 480p (525p): fH 31.50 kHz; fV 60 Hz 576p (625p): fH 31.25 kHz; fV 50 Hz 720 (750)/60p: fH 45.00 kHz; fV 60 Hz 720 (750)/50p: fH 37.50 kHz; fV 50 Hz 1035/60i: fH 33.75 kHz; fV 60 Hz 1080 (1125)/60i: fH 33.75 kHz; fV 60 Hz 1080 (1125)/50i: fH 28.13 kHz; fV 50 Hz 1080/25p: fH 28.13 kHz; fV 25 Hz 1080/24p: fH 27.00 kHz; fV 24 Hz 1080/24sF: fH 27.00 kHz; fV 48 Hz 1080/30p: fH 33.75 kHz; fV 30 Hz 1080/60p: fH 67.50 kHz; fV 60 Hz 1080/50p: fH 56.25 kHz; fV 50 Hz
		Video/S-Video	fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60] fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM]
	Optical axis shift	Vertical	+60% from center of screen (manual)
	Optical axis shift	Horizontal	±10% from center of screen (manual)
	Keystone correction range	Vertical	±40ﾟ
	Installation		Ceiling/floor, front/rear
	Terminals	HDMI IN	HDMI 19-pin x 1 (Deep Color, compatible with HDCP) 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, VGA (640 x 480) -WUXGA (1,920 x 1,200)*2; compatible with non-interlaced signals only; dot clock: 25-162 MHz Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz)
		DVI-D IN	DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) 480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p, 1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p, VGA (640 x 480)-WUXGA (1,920 x 1,200)*2; compatible with non-interlaced signals only; dot clock: 25-162 MHz
		RGB 1 IN	BNC x 5 (RGB/ YPBPR x 1)
		RGB 2 IN	D-sub HD 15-pin (female) x 1 (RGB/ YPBPR x 1)
		VIDEO IN	BNC x 1 (composite video)
		S-VIDEO IN	Mini DIN 4-pin x 1 (S-Video)
		AUDIO IN 1	RCA x 2 (L, R x 1), 0.5 Vrms
		AUDIO IN 2	M3 x 1 (L, R x 1), 0.5 Vrms
		AUDIO IN 3	M3 x 1 (L, R x 1), 0.5 Vrms
		AUDIO OUT	M3 x 1 (L, R x 1) (monitor out: 0-2.0 Vrms, variable)
		SERIAL IN	D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
		REMOTE IN	D-sub 9-pin (female) x 1 for external control (contact control)
		LAN	RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)
		WIRELESS MODULE	Connector for optional wireless module ET-WM200 x 1
	Power cord length		3.0 m (9 ft 10 in)
	Power supply		100-240 V AC, 5.0-1.9 A, 50/60 Hz
	Power consumption		415 W (500 VA) (0.3 W at 100-120 V AC, 0.4 W at 220-240 V AC with standby mode set to ECO*3, 15 W with standby mode set to NORMAL)
	Dimensions (W × H × D)		332 x 1684 x 484.5 mm (13-1/16˝ x 6-5/8˝ 4 x 19-1/16˝ ) (including the lens)
	Weight		Approximately 8.5 kg (18.7 lbs.)
	Operating temperature		0°C-45°C (32°F-113°F)
	Operating humidity		20%-80% (no condensation)
	Supplied accessories		Power cord with security lock, wireless remote control unit, batteries for remote control (AA type for North America, R6/LR6 type for Europe and Asia) x 2, wire rope, software CD-ROM (Logo Transfer Software, Multi Projector Monitoring & Control Software Ver. 2, Wireless Manager ME 5.5)
NOTE			1: Measurement, measuring conditions and method of notation all comply with ISO 21118 international standards. 2: Compliant with VESA CVT-RB. 3: When the standby mode is set to ECO, network functions such as power on over the LAN will not operate. Also, only certain commands can be received for external control using the serial terminal. 4: With legs at shortest position.