Increased Piping Length for Greater Design Flexibility
Adaptable to various building types and sizes
Actual piping length: 200 m
Maximum piping length: 1,000 m
* Elevation difference of Max. 90 m in case of ODU is higher than IDU may be allowed following certain conditions. Please consult with Panasonic sales engineers in case of piping elevation of over 50 m is required.
Up to 50 m Length Difference Between the Longest and the Shortest Piping from the First Branch
Up to 50 m length difference between the longest and the shortest piping from the first branch. The flexible piping layout makes it easier to design systems for locations such as train stations, airports, schools, and hospitals.
Up to 64 Units Connectable
Up to 64 indoor units can be connected in a single system for ultimate design flexibility.
Note: Maximum number of indoor units depends on outdoor unit capacity.
Connectable Indoor/Outdoor Unit Capacity Ratio Up to 130%
FSV systems attain a maximum indoor unit connection capacity of up to 130%* of the unit’s connection range, depending on the outdoor and indoor models selected. So for a reasonable investment, FSV systems provide an ideal air conditioning solution for locations where full cooling/heating is not always required.
*If the following conditions are satisfied, the effective range is above 130% up to 200%.
(1) Obey the limited number of connectable indoor units.
(2) The lower limit of operating range for heating outdoor temperature is limited to -10°CWB (standard -25°CWB).
(3) Simultaneous operation is limited to less than 130% of connectable indoor units.
Note: If more than 100% indoor units are operated with a high load, the units may not perform at the rated capacity. For the details, please consult with an authorised Panasonic dealer.
MNcIU : Maximum Number of Connectable Indoor Unit
Compact Design Enables Conveyance by Lift
22.4 - 28.0 kW are able to fit inside a lift for easy handling on site.
High External Static Pressure Allows Installation on Every Floor of a Building
With a newly designed fan, fan guard, motor, and casing, new models can be custom-installed on site to provide up to 80 Pa of external static pressure. An air discharge duct prevents shortages of air circulation, allowing the installation of outdoor units on every floor and compatibility with high-rise buildings.