F-PXJ30AHS Air Purifier

လုပ်ဆောင်ချက်

What is nanoe™?

A nanoe™ is a fine (5 to 20nm) and weak acidic water particle with a reactive substance and an electric charge.

How nanoe™ Work?

nanoe™ possesses the characteristics of removing hydrogen from viruses, bacteria, odours and allergens. Effectiveness of virus removal*¹ depends on the number of OH radical*². With nanoe™ device that generates at a high rate of 480 billion per second, the higher the effectiveness of the anti-vital power.

*¹ The figure shows the effect resulted in 10m enclosed test space for 4 hours, not at actual usage space. [Staphylococcus Aureus] Test Laboratory: Kitasato Research Centre of Environmental Sciences˙Test Methodology: Exposed to charge water particles for 4 hours in 10 cu.m. test room˙Test Result: 99.9% is inhibited.

*² Based on the ESR test methodology, applicable in the air purifier launched after September 2011.

Characteristic Of nanoe™:
Long Life

6 times longer lifespan than normal ion
nanoe™ has a lifespan of 6 times longer than normal ion and it contains moisture around 1,000 times to minus ions.

Characteristic Of nanoe™:
Microscopic Scale

One-billionth of the volume size of a steam particle
nanoe™ is much smaller than steam that can deeply penetrate into cloth fabrics to restrain dirt.

Characteristic Of nanoe™:
Water-originated

6 times longer lifespan than normal ion
nanoe™ is comes from condensed moisture in the air. Water replenishment for the appliance is not required.

3D Circulation Airflow

Usually, various types of pollutants appear at different areas between the ceiling and the floor in the room. In response, the 3D circulation airflow is divided into two modes — "Side Airflow" and "Front Airflow" to remove pollutants accordingly.

Composite Air Filter

Composite Air Filter
The Composite Air Filter consists of 3 types of technology: Super Alleru-buster, Green Tea Catechin and Antibacteria Enzyme. It inhibits 17 kinds of virus, bacteria and allergens up to 99%.

1. Turbo Mode
When the function is activated, the indicator will be turned on and the clean sign will blink in red and blue. After 10 minutes, the turbo operation will return to the previous speed setting.

2. Sleep Mode
Operate in low speed with display off or dimmed for 8 hours and turn off automatically.

3. Auto Mode
The appropriate speed will shift automatically according to the pollution level.

4. Clean Sign
The dirt sensor detects dirt in the air and notifies with the clean sign.
The clean sign can be switched off by pressing the button of [Sleep(8h)] and [Air Volume] simultaneously for about 3 seconds.

5. Filter Replace Indicator
It will remind you to replace the filter when it reaches its lifetime.