MEN’S SELF STYLING
STEP 1: Trim length all over
CHEEKS, JAW, CHIN
Attachment: 5mm
Evenly trim beard on neck and face to 5 mm.
STEP 2: Make a sharp line
LOWER JAW
Without attachment: Blade
Create a line under the jaw by gradually trimming downwards.
STEP 3: Trim cleanly
NECK
Without attachment: Blade
Hold trimmer the other way around and trim upwards to the line.
STEP 4: Trim cleanly
CHEEKS
Without attachment: Blade
Trim unwanted hair on the cheeks with blade.
Beard | Full Beard | 4 steps
Leave the cheek line natural. If you feel it's too high, define a line at an angle from the sideburn down to the outer edge of your moustache.
STEP 1: Trim all over
CHEEKS, JAW, CHIN
Attachment: 1mm
Trim entire beard to a length of 1 mm.
STEP 2: Trim thoroughly
CHEEKS, JAW, CHIN
Attachment: 1mm
Move trimmer, in various directions for thorough, even trimming.
STEP 3: Trim cleanly
CHEEKS
Without attachment: Blade
Trim unwanted hair on the cheeks with blade.
STEP 4: Trim cleanly
NECK
Without attachment: Blade
Cleanly trim unwanted hair, leaving about 1 cm under jaw.
Beard | Five O’Clock Shadow | 4 steps
As the name suggests, this style should be kept as short as possible. The important thing is to trim it evenly to the same length every day.
STEP 1: Trim all over
CHEEKS, JAW, CHIN
Attachment: 3mm
Evenly trim entire beard to 3 mm.
STEP 2: Trim cleanly
LOWER NECK
Without attachment: Blade
Cleanly trim up to line under the chin with blade.
STEP 3: Trim cleanly
CHEEKS
Without attachment: Blade
Cut unwanted hair on the cheeks with blade.
STEP 4: Cut excess long hair
HAIR
Attachment: 20mm
Cut hair shorter at the nape and around ears if desired.
Beard | Five O’Clock Shadow | 4 steps
As the name suggests, this style should be kept as short as possible. The important thing is to trim it evenly to the same length every day.
STEP 1: Trim all over
CHEEKS, JAW, CHIN
Attachment: 4mm
Evenly trim entire beard to 4 mm.
STEP 2: Make chin line
CHEEKS, CHIN
Without attachment: Blade
Following your jawline, create a wide line of beard from ear to chin.
STEP 3: Trim above the line
CHEEKS
Without attachment: Blade
Trim upwards from above the line with blade.
Beard | Chin Strap | 5 steps
First, grow a full beard and moustache, then define the edges of the beard. Keep your cheeks, moustache and the area below your bottom lip clean.
STEP 4: Trim under chin
NECK
Without attachment: Blade
Trim neck up to line under chin without trimming the chin strap.
STEP 5: Detail moustache
MOUSTACHE
Without attachment: Precision Trimmer
Finish moustache details under nose and around mouth with precision trimmer.
* For smooth trimming, hold the blades vertically against the skin.
STEP 1: Trim all over
CHEEKS, JAW, CHIN
Attachment: 5mm
Evenly trim the entire beard to 5 mm.
STEP 2: Trim cleanly
CHEEKS
Without attachment: Blade
Decide on the line from sideburns to around mouth and
trim unwanted parts.
STEP 3: Trim cleanly
NECK, UNDER CHIN
Without attachment: Blade
Trim unwanted hair from under chin to neck.
Beard | Balbo | 6 steps
The Balbo features a moustache, soul patch and goatee. Trim a gap from your moustache to the goatee on each side. This is the Balbo’s most distinguishing feature.
STEP 4: Detail moustache
MOUSTACHE
Without attachment: Blade
Create a line above the moustache with detailed trimming.
STEP 5: Trim sides to separate
SIDES OF MOUTH
Without attachment: Precision Trimmer
Cut sides of moustache to separate moustache and chin
beard.
* For smooth trimming, hold the blades vertically against the skin.
STEP 6: Detail goatee
CHIN
Without attachment: Precision Trimmer
Trim unnecessary hair around mouth to create a soul
patch.
* For smooth trimming, hold the blades vertically against the skin.
STEP 1: Trim all over
CHEEKS, JAW, CHIN
Attachment: 5mm
Evenly trim entire beard to 5 mm.
STEP 2: Make circle line
AROUND MOUTH
Without attachment: Blade
Trim from sideburns to sides of mouth, leaving a circle beard around mouth.
STEP 3: Trim around the circle
UNDER CHIN, NECK
Without attachment: Blade
Trim from under chin to neck to leave a round shaped beard.
STEP 4: Trim cleanly
CHEEKS
Without attachment: Precision Trimmer
Cleanly trim cheek areas outside the circle
beard.
* For smooth trimming, hold the blades vertically against the skin.
Beard | Five O’Clock Shadow | 4 steps
As the name suggests, this style should be kept as short as possible. The important thing is to trim it evenly to the same length every day.
STEP 1: Trim outside smile lines
CHEEKS
Without attachment: Blade
Decide on lines for moustache and chin beard following
smile lines, trim outside lines.
STEP 2: Make a rough goatee shape
JAW, UNDER CHIN
Without attachment: Blade
Trim unwanted hair on jaw and under chin outside smile
lines to create rounded shape of goatee beard.
STEP 3: Trim to 1-3mm
MOUSTACHE
Attachment: 1-3mm
Trim moustache length to 1-3 mm.
Beard | Moustache and Goatee | 6 steps
There's no need to be neat and detailed about it, so this style is recommended for beginners. Simply grow a beard, trim it evenly, and then create the desired shape.
STEP 4: Detailing goatee shape
CHIN
Without attachment: Precision Trimmer
Following smile lines, trim the outline of goatee to the
same width as the moustache.
* For smooth trimming, hold the blades vertically against
the skin.
STEP 5: Separate the sides
SIDES OF MOUTH
Without attachment: Precision Trimmer
Cut hair at sides of mouth so that the moustache isn't
connected to the goatee.
* For smooth trimming, hold the blades vertically against the skin.
STEP 6: Trim cleanly
CHEEKS
Without attachment: Blade
Trim all unwanted hair on cheeks.
